|
DWS 110 &
12 Volt |
CWS 110 &
12 Volt |
GWS 110 &
12 Volt |
| The DWS systems are designed to be used on pumping units that are controlled by a timing device for automated startup. Both the DWS 110 & 12 volt systems will delay startup of automated equipment by a 30 second audible voice message. Following the message there is a ten second audible countdown prior to activation. The DWS 12 volt system is designed for plug and play on SAM'S pump off controllers. |
The CWS system is
designed to be used on compressor units that are controlled by a
timing device for automated startup. The CWS systems will delay the
startup of the compressor by a 30-second audible voice message.
Following the message there is a ten second audible countdown prior
to activation.
Installation |
The GWU is designed
to assist current monitoring systems that utilize lights or rotating
beacons. Lights may go unnoticed when employees or subcontractors
are working thereby exposing them to potential lethal H2S gas. Also,
persons not familiar with the dangers of H2S gas and/or warning
lights will be verbally advised of the dangerous gas levels that
exist and to exit the area.
When the monitor is activated, the GWS will instantly and continuously play a message in both English and Spanish that H2S levels have reached a lethal limit and to "clear the area immediately" until authorized personnel have determined that conditions are at a safe level. The unit will play the message continuously until the monitor has been cleared or is shut down. |
|
|||||||||||||||||||||||||||||||||||||||
| See more Pictures | See Videos | ||||||||||||||||||||||||||||||||||||||
|
|
|
||||||||||||||||||||||||||||||||||||||
|
|
|||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||
